|
07-17-2008, 06:39 PM | #1 |
fizzerriderextraordinaire
Join Date: Mar 2008
Location: Bronx, Ny
Moto: '98 fzr600
Posts: 59
|
Grrrr @ this FZR!
i swear its the fzr from hell! So im on the highway coming home doing about 55, i had fixed the vacuum leak issue so its reving/idling fine now. Traffic comes to a stand still so i slowdown and shift down. When its time to get going i put it in first and the damn thing wont go past 10 mph in first, shift to second and it doesnt move pass 15. Took the carbs off, cleaned them good [just in case] and nothing still not pulling. WOT will only get me revs in the 3ks while in gear. is wrong with this thing?
|
07-17-2008, 06:52 PM | #2 |
flyin high
Join Date: Mar 2008
Location: cali
Moto: 10speed huffy w/cards in the spokes
Posts: 2,318
|
need more info-how does it sound when you rev it? will it go past 3k when its not under load-like in nuetral?
__________________
"Racing Is Life, Everything Before and After is Just Waiting" Steve McQueen |
07-17-2008, 07:01 PM | #3 |
fizzerriderextraordinaire
Join Date: Mar 2008
Location: Bronx, Ny
Moto: '98 fzr600
Posts: 59
|
yeah itll red-line in neutral but as soon as its put in gear it wont rev pass 3k unless i pull the clutch about 25%-50% in. It sounds like its stalling when i dont clutch it in while in gear with the throttle open.
|
07-17-2008, 07:06 PM | #4 |
flyin high
Join Date: Mar 2008
Location: cali
Moto: 10speed huffy w/cards in the spokes
Posts: 2,318
|
when it redlines in nuetral, does it sound clean, or shitty? u mentioned carbs, so start there. u might have a stuck float...or two. is it running on all 4 cylinders=are all four pipes hot?
__________________
"Racing Is Life, Everything Before and After is Just Waiting" Steve McQueen |
07-17-2008, 07:22 PM | #5 |
fizzerriderextraordinaire
Join Date: Mar 2008
Location: Bronx, Ny
Moto: '98 fzr600
Posts: 59
|
all 4 running, i checked the floats for play before i screwed in the bowls. Sounds clean when i run it and starts right up so i dont think its the battery. I'll check the voltage on it though just to be safe, but i really dont think its the battery.
|
07-17-2008, 07:38 PM | #6 |
flyin high
Join Date: Mar 2008
Location: cali
Moto: 10speed huffy w/cards in the spokes
Posts: 2,318
|
you can get a stuck float at anytime, even right after u put it together, just fyi.
but it sounds clean, runs on all four, so thats out...next id look at electrical or clutch... coulda broke a plate maybe.... could still be carb related...getting gas and everything? honestly have no clue, just going thru what i would do if i were u. never wrenched on a yammi b4, but carbs are carbs. you could have a bad fuel filter could have bad gas could have gotten some trash in the carbs did u take em all apart and blow em out or just drop the bowls? could have a bad/intermittent electrical connection to the coils or ignition. clutch problems-check the adjustment on the cable, and i think fzr's have another adjustment where the cable goes into the case, and check the plates. could be battery related-check voltage with it off, and then make sure its charging when running. thats all i can think of for now. i know alot about old kawi's and suzuki's, not so much in the old yamaha repertoire
__________________
"Racing Is Life, Everything Before and After is Just Waiting" Steve McQueen |
07-17-2008, 07:06 PM | #7 |
too much time on my hands
Join Date: Jul 2008
Location: the northern district of god damn
Moto: 01 ZX6R, looking for more now.
Posts: 1,802
|
Sounds like a weak battery because of something or other. my EX500 went through this when a magnet or three came off my flywheel and the battery got weak. check that out just in case.
could also be something else entirely. I'll trade you for my bike. lol |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|