Help Installing Flushmounts

NONE_too_SOFT · 05-11-2008, 07:42 PM

I'm stuck trying to get the front fairing off my bike. I've taken the three bolts on the outside of the fairing off, and i've taken the two large bolts that hold the front off as well, but i cant seem to figure it out. I know there are a lot of plastic screws and such holding stuff together, but i've never messed with these before and dont know exactly how to get them off. can anybody shed some light on the situation?

dReWpY · 05-11-2008, 07:46 PM

the plastic tabs and screws suck balls, the only down side on the hondas are those damn psuch rivots

DLIT · 05-11-2008, 07:47 PM

Push rivots are easy as fuck to take out. Just push the center part inward and pull the whole thing out.

NONE_too_SOFT · 05-11-2008, 07:49 PM

yea thats what i thought, but hows bout the little guys w/ the phillips head? fucking turn those things forever and nothing happens (yes i know they arent screws)

DLIT · 05-11-2008, 08:03 PM

Turn them until they rise a little bit and then pry the base up and out. Real easy.

NONE_too_SOFT · 05-11-2008, 08:06 PM

Quote:

Originally Posted by DLIT

Turn them until they rise a little bit and then pry the base up and out. Real easy.

thx again dlit.

05-11-2008, 07:42 PM	#1
NONE_too_SOFT Chopstix / \ Join Date: Feb 2008 Location: Akron OH Moto: 03 CBR RR Posts: 5,350	Help Installing Flushmounts I'm stuck trying to get the front fairing off my bike. I've taken the three bolts on the outside of the fairing off, and i've taken the two large bolts that hold the front off as well, but i cant seem to figure it out. I know there are a lot of plastic screws and such holding stuff together, but i've never messed with these before and dont know exactly how to get them off. can anybody shed some light on the situation?

05-11-2008, 07:47 PM	#3
DLIT Clit Commander Join Date: Feb 2008 Location: Las Vegas Moto: 2012 Ducati 1199 Panigale S Posts: 4,189	Push rivots are easy as fuck to take out. Just push the center part inward and pull the whole thing out. __________________ Dress for the crash. Not the ride.

05-11-2008, 08:03 PM	#5
DLIT Clit Commander Join Date: Feb 2008 Location: Las Vegas Moto: 2012 Ducati 1199 Panigale S Posts: 4,189	Turn them until they rise a little bit and then pry the base up and out. Real easy. __________________ Dress for the crash. Not the ride.

05-11-2008, 07:49 PM	#4
NONE_too_SOFT Chopstix / \ Join Date: Feb 2008 Location: Akron OH Moto: 03 CBR RR Posts: 5,350	yea thats what i thought, but hows bout the little guys w/ the phillips head? fucking turn those things forever and nothing happens (yes i know they arent screws)