07-26-2010, 06:11 PM | #11 | |
Follower
Join Date: Nov 2008
Posts: 5,549
|
Quote:
I have asked for clarification. Twice.
__________________
Racing For Smiles Last edited by shmike; 07-26-2010 at 10:28 PM.. Reason: Took my two cents off the table. |
|
07-26-2010, 06:13 PM | #12 |
token jewboy
Join Date: Nov 2008
Moto: CBR 900, KLR ugly ass duckling, Gas Man
Posts: 10,799
|
dont be a dick and stuff someone in the corners, follow the line, and pass where allowed. If some is all over the track and you cant pass, pull into the pits, come to a complete stop and get back out, that should give the control riders enough time to get the guy in shape and pass when you catch up
__________________
|
07-26-2010, 06:24 PM | #13 |
Custom User Title
Join Date: Sep 2008
Posts: 120
|
There are two major problems with passing on the outside. First, it often requires you to be significantly faster than the person you are passing, and two, it leaves you directly in the path of a crashing motorcycle/rider if that person happens to go down while you are trying to ride around the outside of them. Inside passing is MUCH easier. It's fast, it's safer for the passer, and it can be done virtually anywhere on the track. Watching national level riders get through traffic is a thing of beauty, because they can do it virtually anywhere without losing time, and with minimal disruption to the slower riders. The better you are the less patience is needed, because in reality, there is almost always room.
|
07-26-2010, 06:34 PM | #14 |
White Trash Hero
Join Date: Mar 2008
Location: NW Arkansas
Moto: Buell 1125R Porco Rosso Edition
Posts: 4,895
|
Smileyman's rule numba 1. Someone is always faster.
Smileyman's rule Numba 2. Karma is a bitch. Hold your line, leave some room on the outside of the straights, and have fun The faster rider usually carries more corner speed and gets a better drive no matter hisline. He or she can pass on the straight if you leave hime 18 inches. If your real squeamish better make that 36 inches...
__________________
Arkriders.com To be the best you must first be willing to risk the worst! |
07-26-2010, 07:03 PM | #15 | |
moderator chick
Join Date: Feb 2008
Location: Hill Country TX
Moto: Pasta Rockets
Posts: 8,917
|
Quote:
Most orgs [including my own] don't allow passing in turns for this reason. That is, especially in Novice groups. Learning to hold a line and be confident with that line is sometimes a large enough lesson without someone else in the peripheral. Derf's note about pit lane - finding your own personal space on the track filled with parades - is IMHO the best way to deal with rules about passing.
__________________
We have enough youth. How about a fountain of "smart"? Come Play at the Track!! http://www.elitetrackdays.com |
|
07-26-2010, 07:19 PM | #16 |
Let's do another U-turn
Join Date: Feb 2008
Location: Indiana
Moto: 2009 V-Strom
Posts: 3,816
|
She's questioning my reasoning for looking behind me and waving people by on my trackday this weekend. Here's the full story, if you haven't seen it in the other thread.
I was on the V-strom on the track. It was sportbiketracktime. If any of you have ever ridden any of their events, you know they have classroom instruction for beginners and then they take the beginners out in groups of 4 or 5 riders with an instructor. I didn't want to ride in a group of people like that and wanted to ride my own pace. The only way to do that was in intermediate. I was the slowest person in the group, by far, simply because of the bike I was on. I scraped peg numerous times and the back end got loose a few times. I was also running the stock "Death Wings" on the bike. I simply couldn't go much faster without losing it. I am fully aware that it's the passing rider's responsibility to pass safely and I maintained a consistent line on the track to allow them to do so. However, out of courtesy for the other riders on the track, I would look behind me in certain stretches where it was safe to do so, and I would move off the line so they could pass. Is there really something wrong with being courteous to other riders that have paid good money for a track day and want to push it to the limit and not be held up by a guy riding a much slower bike? ETA: I did consider dropping down to the beginner group after the first session in intermediate, but was told I was doing fine and it was ok to stay where I was. Last edited by Captain Morgan; 07-26-2010 at 07:25 PM.. |
07-26-2010, 08:16 PM | #17 |
giggity
Join Date: Nov 2008
Location: socal
Moto: street, sumo & dirty
Posts: 1,071
|
|
07-26-2010, 08:39 PM | #18 | ||
Custom User Title
Join Date: Sep 2008
Posts: 120
|
Quote:
Which is a nice segue into... Quote:
When slower riders do this, it's often because the faster rider caught them in a spot they personally find difficult/impossible to pass in, therefore they have no idea what the faster rider is about to do to get around them. To execute the pass, the faster rider is counting on the slower one to maintain a predictable race line. If the slower rider becomes aware of the presence of the faster rider and tries to "give up" to allow the faster rider by, they can easily create a collision scenario. The best thing a slow rider can do for everyone else on the track is to ignore what's behind them and ride in a predictable and controlled manner. |
||
07-26-2010, 08:42 PM | #19 | |
moderator chick
Join Date: Feb 2008
Location: Hill Country TX
Moto: Pasta Rockets
Posts: 8,917
|
Quote:
You are better off, if you are slower, to simply maintain your predictable course of travel. And, for the love of all that's holy, don't drag race on the straight when they actually DO pass you.
__________________
We have enough youth. How about a fountain of "smart"? Come Play at the Track!! http://www.elitetrackdays.com |
|
07-26-2010, 08:46 PM | #20 | |
Hold mah beer!
Join Date: Feb 2008
Location: 80 Miles South of Moto Heaven
Moto: 08 R1200GS
Posts: 23,268
|
I am glad there is no passing rules for fiddy racing. Kicking, punching, wrecking, headbutting, running over are all acceptable forms of passing.
__________________
Quote:
|
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|