Go Back   Two Wheel Fix > In the Garage or Shop > Mechanical or Tech

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-29-2008, 07:39 PM   #11
JoshuaTree
DILLIGAF?
 
JoshuaTree's Avatar
 
Join Date: Nov 2008
Location: Austin, Texas, USA, Earth, Sol, Western Spiral Arm, Milky Way
Moto: 1993 K75SA
Posts: 483
Default

Yes. Normally you'll start with a fully charged battery (in your case, you'd use a trickle charger to 'fill up' the battery overnight) - your bike will be running off of the battery for the duration of the test.

You'll disconnect the stator leads at the point closest to the stator before starting. Normally, you'll start the bike and rev it up to the test RPM point - normally between 3000 and 4500 RPM for most bikes (its useful to have help - someone to twist the throttle and someone to take the readings with your multimeter). Test each and every pairing combination - For a 'three wire' system: wires 1&2, 2&3, and 1&3 (or however many pairing combinations to account for the wires coming out of the stator). The voltage should be the same for each of the pairing combinations. Be aware that the plug coming out of the cover may have 'other wires' that are for other sensors/purposes. You'll only need to test the (normally thick) wires for the stator.
__________________
"Quis custodiet ipsos custodes?"
"Learn to do the counter-intuitive things that may one day save your ass..."
"... Love Much, Laugh Often..." - Amanda Kay Corso (January 18, 1980 - April 15, 2008)
JoshuaTree is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:46 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.