Hydraulic brake issues... - Page 2

Gas Man · 12-20-2009, 01:31 AM

So it does pump up firm?

Are you rolling it when it becomes spongy again?

BobTheBiker · 12-20-2009, 07:34 AM

this indicates you either have a HUGE air pocket, or you need to take it to the shop to be repaired due to a major air indtroductory point somewhere.

Tmall · 12-20-2009, 09:55 AM

Plus one to Bob. Be careful, hate to have you seriously injured over this.

wildchild · 12-22-2009, 03:34 PM

if it isn't bleeding out clean then you aren't done yet. The air pockets can be quite large and sometimes frustrating to get out. Keep trying.

i think what gas is saying is when the lever goes to the bars can you pump it a few times (this is not while bleeding, but while riding) and it begins to feel more normal?
kind of like a car, when the brakes are spongy you "pump them up" same thing. if this is the case and the lever remains firm as you squeeze it after pumping it up then you probably just have an air pocket.
if you have a leak the lever will most likely not firm up from pumping.

Sean · 12-24-2009, 04:59 PM

Well it stops fine now. But it's still coughing up a ton of (mostly) air when I bleed it. I wonder if I'm just doing it wrong but I sure don't think I am.

Homeslice · 12-24-2009, 05:45 PM

Check the slave cylinder down near the engine to see if it's leaking fluid.

Sean · 12-24-2009, 06:47 PM

Quote:

Originally Posted by Homeslice

Check the slave cylinder down near the engine to see if it's leaking fluid.

Hrm? Cable goes from the handlebar down the forks, nowhere near the motor...were you thinking the rear brake? This is for the front...or am I missing something?

BobTheBiker · 12-24-2009, 07:43 PM

I think he was thinkin hydro clutch.

Homeslice · 12-24-2009, 08:58 PM

Yeah as soon as I heard hydraulic, I thought you were talking about clutches.

12-20-2009, 01:31 AM	#11
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	So it does pump up firm? Are you rolling it when it becomes spongy again? __________________ -Chris "Why pay somebody else to fuck up your bike?" Run Amsoil Product

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-20-2009, 07:34 AM	#12
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	this indicates you either have a HUGE air pocket, or you need to take it to the shop to be repaired due to a major air indtroductory point somewhere.

12-20-2009, 09:55 AM	#13
Tmall Aspiring Rapper Join Date: Nov 2008 Location: Halifax, NS Moto: '12 CB1000R Posts: 3,569	Plus one to Bob. Be careful, hate to have you seriously injured over this.

12-22-2009, 03:34 PM	#14
wildchild cruiser Join Date: Nov 2008 Location: on the run Moto: '09 HD superglide, 16 Yamaha FZ 09 Posts: 2,749	if it isn't bleeding out clean then you aren't done yet. The air pockets can be quite large and sometimes frustrating to get out. Keep trying. i think what gas is saying is when the lever goes to the bars can you pump it a few times (this is not while bleeding, but while riding) and it begins to feel more normal? kind of like a car, when the brakes are spongy you "pump them up" same thing. if this is the case and the lever remains firm as you squeeze it after pumping it up then you probably just have an air pocket. if you have a leak the lever will most likely not firm up from pumping.

12-24-2009, 04:59 PM	#15
Sean giggity Join Date: Nov 2008 Location: socal Moto: street, sumo & dirty Posts: 1,071	Well it stops fine now. But it's still coughing up a ton of (mostly) air when I bleed it. I wonder if I'm just doing it wrong but I sure don't think I am.

12-24-2009, 05:45 PM	#16
Homeslice Elitist Join Date: Nov 2008 Location: SF Bay Area Moto: Gix 750 Posts: 11,351	Check the slave cylinder down near the engine to see if it's leaking fluid.

12-24-2009, 07:43 PM	#18
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	I think he was thinkin hydro clutch.

12-24-2009, 08:58 PM	#19
Homeslice Elitist Join Date: Nov 2008 Location: SF Bay Area Moto: Gix 750 Posts: 11,351	Yeah as soon as I heard hydraulic, I thought you were talking about clutches.