Frakenbike

NONE_too_SOFT · 07-11-2008, 05:51 PM

Its ALIVE!

Well not yet. still waiting on a few parts from the egay... most importantly a fairing stay. Then i'll need to do is buy a ram air cover and some various small parts and it'll look normal again. Just sucks i'm so close and have no money to buy the parts i need... fawk.

I'm pretty bad ass at plastic welding, though.

Rider · 07-11-2008, 06:21 PM

Seems like an awful lot of work. How much are used platics from EBay?

NONE_too_SOFT · 07-11-2008, 06:34 PM

i got that front for 29 bucks (broken), as opposed to 250-300 for an aftermarket brand or 400-500 for an OEM.

It honestly took me only 15 minutes to weld the cracks, and about 30 minutes to fabricate and weld the left side.

BobTheBiker · 07-11-2008, 06:37 PM

Trust me, thats no frankenbike. I used to own an 89 GS500E that someone took the stock 37mm forks, triple trees, and rims off of, BORED THE NECK OUT, and put an 05 ZX6R front end, triple trees, stem, forks, rim and all onto the thing. shoulda pressed the steering stem out of both the stock clamps and the 636 set, and it would have fit perfectly.

THAT was a cool bike to own. 500cc, radial master with TWO 4 pot calipers supersport suspension and it would literally stop on a hair. not a dime, but a HAIR. I miss that now.

NONE_too_SOFT · 07-11-2008, 06:58 PM

well you can piss farther than me, i suppose.

I guess my bike is just a slightly mutilated bike with a prosthetic.

Audiomechanic · 07-11-2008, 07:49 PM

Good work!

OneSickPsycho · 07-11-2008, 08:54 PM

You need to post up your plastic welding setup.

NONE_too_SOFT · 07-12-2008, 04:19 PM

ha, its pitiful really. i'll post it up when i get home

OneSickPsycho · 07-13-2008, 11:03 AM

Quote:

Originally Posted by NONE_too_SOFT

ha, its pitiful really. i'll post it up when i get home

Are you home yet?

NONE_too_SOFT · 07-13-2008, 02:36 PM

ya i made it home yesterday, but never got around to messing with the bike. will try today.

07-11-2008, 05:51 PM	#1
NONE_too_SOFT Chopstix / \ Join Date: Feb 2008 Location: Akron OH Moto: 03 CBR RR Posts: 5,350	Frakenbike Its ALIVE! Well not yet. still waiting on a few parts from the egay... most importantly a fairing stay. Then i'll need to do is buy a ram air cover and some various small parts and it'll look normal again. Just sucks i'm so close and have no money to buy the parts i need... fawk. I'm pretty bad ass at plastic welding, though. Last edited by NONE_too_SOFT; 07-11-2008 at 06:03 PM..

07-11-2008, 07:49 PM	#6
Audiomechanic Mobile Post-Whore Unit Join Date: Feb 2008 Location: Houston, TX Moto: 2000 Honda Magna 750 Posts: 455	Good work! __________________ This is my signature. Yay.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-11-2008, 06:21 PM	#2
Rider Moto GP Star Join Date: Feb 2008 Posts: 12,156	Seems like an awful lot of work. How much are used platics from EBay?

07-11-2008, 06:34 PM	#3
NONE_too_SOFT Chopstix / \ Join Date: Feb 2008 Location: Akron OH Moto: 03 CBR RR Posts: 5,350	i got that front for 29 bucks (broken), as opposed to 250-300 for an aftermarket brand or 400-500 for an OEM. It honestly took me only 15 minutes to weld the cracks, and about 30 minutes to fabricate and weld the left side.

07-11-2008, 06:37 PM	#4
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	Trust me, thats no frankenbike. I used to own an 89 GS500E that someone took the stock 37mm forks, triple trees, and rims off of, BORED THE NECK OUT, and put an 05 ZX6R front end, triple trees, stem, forks, rim and all onto the thing. shoulda pressed the steering stem out of both the stock clamps and the 636 set, and it would have fit perfectly. THAT was a cool bike to own. 500cc, radial master with TWO 4 pot calipers supersport suspension and it would literally stop on a hair. not a dime, but a HAIR. I miss that now.

07-11-2008, 06:58 PM	#5
NONE_too_SOFT Chopstix / \ Join Date: Feb 2008 Location: Akron OH Moto: 03 CBR RR Posts: 5,350	well you can piss farther than me, i suppose. I guess my bike is just a slightly mutilated bike with a prosthetic.

07-11-2008, 08:54 PM	#7
OneSickPsycho Ride Like an Asshole Join Date: Feb 2008 Moto: nothing... Posts: 11,254	You need to post up your plastic welding setup.

07-12-2008, 04:19 PM	#8
NONE_too_SOFT Chopstix / \ Join Date: Feb 2008 Location: Akron OH Moto: 03 CBR RR Posts: 5,350	ha, its pitiful really. i'll post it up when i get home

07-13-2008, 02:36 PM	#10
NONE_too_SOFT Chopstix / \ Join Date: Feb 2008 Location: Akron OH Moto: 03 CBR RR Posts: 5,350	ya i made it home yesterday, but never got around to messing with the bike. will try today.