NEW BIKE Yamaha R6!!!! - Page 4

Amber Lamps · 04-26-2010, 09:52 PM

Quote:

Originally Posted by goof2

My bike still had the stock chain and sprockets so I don't know how that would change anything. After I bought the bike I found the TSB you posted applied to my bike. I had a buddy that was the service manager at a Yamaha dealership so I asked him about it. He said it was still covered, give him a week to get the parts in, bring it by, and they would get it done. It took around an hour. You may want to ask one of your buddies at the Honda dealership if they would honor a similar TSB on a Honda if a 520 kit had been done and work from there.

That or just call or stop in and talk to the guys at Yamaha, tell them the situation and ask if they will still do the recall. They may still do it and charge Yamaha for the parts and labor. What I wouldn't do is try to sneak it past them...

goof2 · 04-26-2010, 10:33 PM

Quote:

Originally Posted by Amber Lamps

That or just call or stop in and talk to the guys at Yamaha, tell them the situation and ask if they will still do the recall. They may still do it and charge Yamaha for the parts and labor. What I wouldn't do is try to sneak it past them...

His bike was at the Honda dealer which opened today. The Yamaha dealer doesn't open until tomorrow. I figured he would need to make a decision today and since the Yamaha dealer wasn't open he could only ask his buddies at the Honda dealer for advice.

Full Throttle · 04-26-2010, 11:11 PM

Quote:

Originally Posted by Amber Lamps

That or just call or stop in and talk to the guys at Yamaha, tell them the situation and ask if they will still do the recall. They may still do it and charge Yamaha for the parts and labor. What I wouldn't do is try to sneak it past them...

Quote:

Originally Posted by goof2

His bike was at the Honda dealer which opened today. The Yamaha dealer doesn't open until tomorrow. I figured he would need to make a decision today and since the Yamaha dealer wasn't open he could only ask his buddies at the Honda dealer for advice.

Actually the Yamaha dealer was open, kind of surprised me to be honest. But when i read off the VIN to them they told me it wasnt within the affected range. Thats not true however because it fits perfectly within this range "RJ04E-0000015~0028429" range. so i think they are just trying to get out of it. Im not really feeling like getting into an argument with them cause they are a bunch of assholes over there anyways so im just going to let my friends at Southern do it. its only 45 dollars and they have to file some of the threads on the drive shaft cause the sprocket rubbed some of them a bit when it came off. Im going to tell them to be sure and locktite it as well cause i dont want that shit coming off.

goof2 · 04-27-2010, 11:06 AM

Quote:

Originally Posted by Full Throttle

Actually the Yamaha dealer was open, kind of surprised me to be honest. But when i read off the VIN to them they told me it wasnt within the affected range. Thats not true however because it fits perfectly within this range "RJ04E-0000015~0028429" range. so i think they are just trying to get out of it. Im not really feeling like getting into an argument with them cause they are a bunch of assholes over there anyways so im just going to let my friends at Southern do it. its only 45 dollars and they have to file some of the threads on the drive shaft cause the sprocket rubbed some of them a bit when it came off. Im going to tell them to be sure and locktite it as well cause i dont want that shit coming off.

Having to force them to do it along with the hassle of having to move the bike from one shop to the other wouldn't be worth the $45 to me either. Good luck getting it fixed.

Full Throttle · 04-27-2010, 07:50 PM

Got it fixed all is good she is running great. Only cost 44.70 actually so it was cheaper than they said. Parts only cost 6.38 so it was a cheap fix. Worst case scenario would of been a cracking the case open and replacing the drive shaft. Im glad it wasn't that bad.

Homeslice · 04-27-2010, 08:36 PM

Quote:

Originally Posted by Full Throttle

Actually the Yamaha dealer was open, kind of surprised me to be honest. But when i read off the VIN to them they told me it wasnt within the affected range. Thats not true however because it fits perfectly within this range "RJ04E-0000015~0028429" range. so i think they are just trying to get out of it. Im not really feeling like getting into an argument with them cause they are a bunch of assholes over there anyways so im just going to let my friends at Southern do it. its only 45 dollars and they have to file some of the threads on the drive shaft cause the sprocket rubbed some of them a bit when it came off. Im going to tell them to be sure and locktite it as well cause i dont want that shit coming off.

You mean just the threads that the nut use, right? Hopefully not the splines that the sprocket slides over.

Full Throttle · 04-28-2010, 11:51 PM

Quote:

Originally Posted by Homeslice

You mean just the threads that the nut use, right? Hopefully not the splines that the sprocket slides over.

Yea just the threads for the nut.

marko138 · 04-29-2010, 10:15 AM

Glad its fixed. Now, enjoy that new ride.

Full Throttle · 05-03-2010, 02:28 PM

Yea believe me i am

Rider · 05-03-2010, 02:30 PM

Clean bike. Keep the rubber side down.

04-27-2010, 07:50 PM	#35
Full Throttle ~Italian Stallion~ Join Date: Mar 2008 Location: North West Georgia Moto: 2000 Yamaha YZF-R6 Posts: 446	Got it fixed all is good she is running great. Only cost 44.70 actually so it was cheaper than they said. Parts only cost 6.38 so it was a cheap fix. Worst case scenario would of been a cracking the case open and replacing the drive shaft. Im glad it wasn't that bad.

05-03-2010, 02:28 PM	#39
Full Throttle ~Italian Stallion~ Join Date: Mar 2008 Location: North West Georgia Moto: 2000 Yamaha YZF-R6 Posts: 446	Yea believe me i am

05-03-2010, 02:30 PM	#40
Rider Moto GP Star Join Date: Feb 2008 Posts: 12,156	Clean bike. Keep the rubber side down.