Go Back   Two Wheel Fix > General > Cage Hell

Reply
 
Thread Tools Display Modes
Old 03-11-2013, 01:06 PM   #1
Triple
uncomfortably numb
 
Triple's Avatar
 
Join Date: Nov 2008
Location: JOH-JAH!
Moto: WR250R & Bonneville
Posts: 409
Default Strange cooling system issue.

Any ideas?

1989 22r - Bizarre cooling issue.
Triple is offline   Reply With Quote
Old 03-11-2013, 01:50 PM   #2
anthonyk
WERA White Plate
 
anthonyk's Avatar
 
Join Date: Nov 2008
Location: Austin, TX
Moto: '01 Aprilia Falco
Posts: 1,041
Default

Bad head gasket, so exhaust is leaking over and pressurizing the coolant passages? Happened to me on a subaru I had once.
anthonyk is offline   Reply With Quote
Old 03-11-2013, 03:04 PM   #3
Triple
uncomfortably numb
 
Triple's Avatar
 
Join Date: Nov 2008
Location: JOH-JAH!
Moto: WR250R & Bonneville
Posts: 409
Default

Quote:
Originally Posted by anthonyk View Post
Bad head gasket, so exhaust is leaking over and pressurizing the coolant passages? Happened to me on a subaru I had once.
This is actually the direction I'm leaning. If it's getting worse it would explain the poor performance this morning, too. Nothing else I've done to the truck recently should cause it to stutter the way it did today.
Triple is offline   Reply With Quote
Old 03-12-2013, 01:15 AM   #4
No Worries
Keyboard Racer
 
No Worries's Avatar
 
Join Date: Feb 2008
Location: Mile High City
Moto: Old Superbikes
Posts: 1,016
Default

Whenever I screw up something, I always go back to the last thing I did.

But here's a story for you. Years ago, I was pulling a 25-foot trailer through Jerome, AZ with an early-80's Suburban. The fuel pump started cutting out in narrow, twisty streets. What a fiasco. I brought it to a garage in Wickenburg and watched the mechanic fix it. He said there was a pushrod that pushed the lever on the fuel pump. The pushrod could get cocked so he had to be careful.

I'm pretty sure that Toyota copied the Chevy engine. The pushrod runs off the cam, and something like the water pump could also run off the same pushrod or something.
No Worries is offline   Reply With Quote
Old 03-12-2013, 01:03 PM   #5
Triple
uncomfortably numb
 
Triple's Avatar
 
Join Date: Nov 2008
Location: JOH-JAH!
Moto: WR250R & Bonneville
Posts: 409
Default

Quote:
Originally Posted by No Worries View Post
I'm pretty sure that Toyota copied the Chevy engine. The pushrod runs off the cam, and something like the water pump could also run off the same pushrod or something.
Not saying they couldn't be related, but the 22r's water pump is belt-driven from the crank. It is a strange coincidence that it started overflowing coolant right after replacing the fuel pump, however.
Triple is offline   Reply With Quote
Old 03-13-2013, 03:35 PM   #6
Papa_Complex
Nomadic Tribesman
 
Papa_Complex's Avatar
 
Join Date: Nov 2008
Location: Brampton, Canada
Moto: '09 ER-6n
Posts: 11,150
Default

I would think of trapped air before a gasket burn-through, but the gasket would be #2 on my list.
__________________
"Everything's better with pirates." - Lodge, "Dorkness Rising"

http://www.morallyambiguous.net/
Papa_Complex is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:11 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.