Out of Curiosity...Any JB Weld on your Bike?

Mrs. Colleen · 08-18-2008, 09:32 PM

Is anything on your bike JB Welded on?

After my husband dropped my bike (

) he had to JB Weld one of the blinkers back on.

Luckily you cannot tell at all but it is still there. I think I also have some tabs and cracks JB Welded too.

So does JB Weld hold your bike together at all?

Gunther1000 · 08-18-2008, 09:44 PM

I swear by the stuff, and it is tough. Just none on my current ride. I used it to glue a shifter tip back on once and I was suprized it held till I parted out that bike... theres a lot of stress at a shifter tip! Its all in the prep work.

NONE_too_SOFT · 08-18-2008, 10:11 PM

new bike? not yet.

Old bike, hell yes.

Mrs. Colleen · 08-18-2008, 10:15 PM

Dammit! I was going to but a "only on old bikes" option and did not.

Dnyce · 08-18-2008, 10:20 PM

not on the suzi, but i had some on the kawi for a lil while, then i grinded it off when i had the chance and used a welder cuz it looks neater to me

Phenix_Rider · 08-18-2008, 10:40 PM

A tiny bit of epoxy on the one fairing tab- but that doesn't count. It's strictly there to reinforce my plastic weld.

Mr Lefty · 08-19-2008, 12:03 AM

Quote:

Originally Posted by NONE_too_SOFT

new bike? not yet.

Old bike, hell yes.

not even with all the repairs you've done?

NONE_too_SOFT · 08-19-2008, 12:08 AM

Quote:

Originally Posted by Ebbs15

not even with all the repairs you've done?

to be honest all i've had to do is plastic weld and re-drill a hole or two.

absolutely NO mechanical damage to the bike. not even a bent rearset or shift lever.

frame sliders FTMFW

Mr Lefty · 08-19-2008, 12:15 AM

nice...

oh made this just for you

z06boy · 08-20-2008, 10:44 AM

No JB Weld on either bike but they are both 07's. I almost put race baffled cans on my R1 and some of the guys were having issues with the rivets on the cans when putting them back together and started using JB Weld to keep the rivets from coming loose which I would have done also...so...."almost".

View Poll Results: Any JB Weld on your Bike?
On my current bike - YES	4	19.05%
On my current bike - NO	17	80.95%
Voters: 21. You may not vote on this poll

08-18-2008, 09:44 PM	#2
Gunther1000 Jesus Christ! Join Date: Jul 2008 Moto: (The Chi's lover) Posts: 801	I swear by the stuff, and it is tough. Just none on my current ride. I used it to glue a shifter tip back on once and I was suprized it held till I parted out that bike... theres a lot of stress at a shifter tip! Its all in the prep work. __________________ FTP

08-18-2008, 10:20 PM	#5
Dnyce flyin high Join Date: Mar 2008 Location: cali Moto: 10speed huffy w/cards in the spokes Posts: 2,318	not on the suzi, but i had some on the kawi for a lil while, then i grinded it off when i had the chance and used a welder cuz it looks neater to me __________________ "Racing Is Life, Everything Before and After is Just Waiting" Steve McQueen

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-18-2008, 10:11 PM	#3
NONE_too_SOFT Chopstix / \ Join Date: Feb 2008 Location: Akron OH Moto: 03 CBR RR Posts: 5,350	new bike? not yet. Old bike, hell yes.

08-20-2008, 10:44 AM	#10
z06boy Letzroll Join Date: Feb 2008 Location: Lake Norman area, NC Moto: 07 Red R1 & 07 Blue R6 Posts: 5,265	No JB Weld on either bike but they are both 07's. I almost put race baffled cans on my R1 and some of the guys were having issues with the rivets on the cans when putting them back together and started using JB Weld to keep the rivets from coming loose which I would have done also...so...."almost".