Go Back   Two Wheel Fix > In the Garage or Shop > Mechanical or Tech

Reply
 
Thread Tools Display Modes
Old 02-15-2011, 01:14 PM   #1
Full Throttle
~Italian Stallion~
 
Full Throttle's Avatar
 
Join Date: Mar 2008
Location: North West Georgia
Moto: 2000 Yamaha YZF-R6
Posts: 446
Default Both Blinkers blink when i turn on a turn signal

Okay so i was riding home last night and my buddy was following me in his car. Well when we got home he said that when i turned my blinker on that both of them turned on. I did some investigating and discovered he was correct. However if i turn lets say the left blinker on then its on and really bright. Now the right one turns on as well but is very very dim. But they are LED's so at night even a dim LED looks pretty bright. I checked the wiring and looked followed it all along its path and it doesnt intersect with anything or touch anywhere none of the wiring is corroded or cut. IM kind of stumped on why its doing this. Anyone have an idea or a solution?
__________________
Full Throttle is offline   Reply With Quote
Old 02-15-2011, 01:18 PM   #2
goof2
AMA Supersport
 
goof2's Avatar
 
Join Date: Feb 2009
Posts: 4,756
Default

Maybe a problem with shorting across the switch on the bars?
goof2 is offline   Reply With Quote
Old 02-15-2011, 01:24 PM   #3
Full Throttle
~Italian Stallion~
 
Full Throttle's Avatar
 
Join Date: Mar 2008
Location: North West Georgia
Moto: 2000 Yamaha YZF-R6
Posts: 446
Default

This is where the blinkers are located.
__________________
Full Throttle is offline   Reply With Quote
Old 02-15-2011, 01:29 PM   #4
Full Throttle
~Italian Stallion~
 
Full Throttle's Avatar
 
Join Date: Mar 2008
Location: North West Georgia
Moto: 2000 Yamaha YZF-R6
Posts: 446
Default

Quote:
Originally Posted by goof2 View Post
Maybe a problem with shorting across the switch on the bars?
How would i go about locating that problem? dismanteling the whole switch and checking each wire? I really dont want to do that.

I was thinking i check the wiring by the lights for their volts/amps and then find a capacitor or somthing like that or whatever and just splice it in the middle of the wiring. That way it would maybe stop the excess power getting to the other blinker but would still allow the targeted blinker to turn on cause the capacitor wouldnt stop the electricity that would be greater than what the capacitor can handle. Im just shooting in the dark but thats just anidea i had.
__________________
Full Throttle is offline   Reply With Quote
Old 02-15-2011, 01:30 PM   #5
askmrjesus
Soul Man
 
askmrjesus's Avatar
 
Join Date: Nov 2008
Location: Everywhere, all the time.
Moto: '0000 Custom Turbo Cross (with jet kit).
Posts: 6,481
Default

Quote:
Originally Posted by Full Throttle View Post
However if i turn lets say the left blinker on then its on and really bright. Now the right one turns on as well but is very very dim.
Does the reverse happen if you turn the right blinker on?

JC
__________________
The way things are going, they're gonna crucify me.
askmrjesus is offline   Reply With Quote
Old 02-15-2011, 01:32 PM   #6
Full Throttle
~Italian Stallion~
 
Full Throttle's Avatar
 
Join Date: Mar 2008
Location: North West Georgia
Moto: 2000 Yamaha YZF-R6
Posts: 446
Default

Quote:
Originally Posted by askmrjesus View Post
Does the reverse happen if you turn the right blinker on?

JC
Yea if i turn either blinker on the other also blinks. Granted its very dim, but like i said it looks pretty bright at night since its an LED.
__________________
Full Throttle is offline   Reply With Quote
Old 02-15-2011, 01:40 PM   #7
askmrjesus
Soul Man
 
askmrjesus's Avatar
 
Join Date: Nov 2008
Location: Everywhere, all the time.
Moto: '0000 Custom Turbo Cross (with jet kit).
Posts: 6,481
Default

Quote:
Originally Posted by Full Throttle View Post
Yea if i turn either blinker on the other also blinks. Granted its very dim, but like i said it looks pretty bright at night since its an LED.
Ok, it sounds like it might be a bad resistor, (the whatever you were talking about earlier).

Most LED set ups require a resistor to limit the amount of power that gets to the LEDs. Depending on how it's wired, a blown (or dying) resistor could cause your problem. Find the resistor, and test it.

I'd also take apart the switch housing (it's just a couple of screws, don't be a pussy) and check for corrosion, ala Goof.

JC
__________________
The way things are going, they're gonna crucify me.
askmrjesus is offline   Reply With Quote
Old 02-15-2011, 01:44 PM   #8
Full Throttle
~Italian Stallion~
 
Full Throttle's Avatar
 
Join Date: Mar 2008
Location: North West Georgia
Moto: 2000 Yamaha YZF-R6
Posts: 446
Default

Quote:
Originally Posted by askmrjesus View Post
Ok, it sounds like it might be a bad resistor, (the whatever you were talking about earlier).

Most LED set ups require a resistor to limit the amount of power that gets to the LEDs. Depending on how it's wired, a blown (or dying) resistor could cause your problem. Find the resistor, and test it.

I'd also take apart the switch housing (it's just a couple of screws, don't be a pussy) and check for corrosion, ala Goof.

JC
Okay yea thats kind of what i was thinking i just didnt know the lingo lol. But ill check into all that after classes today. Thanks JC.

P.S. Dont call me a pussy.
__________________
Full Throttle is offline   Reply With Quote
Old 02-15-2011, 03:13 PM   #9
goof2
AMA Supersport
 
goof2's Avatar
 
Join Date: Feb 2009
Posts: 4,756
Default

It looks like both L & R side flashers run through the same relay. I'm just guessing, but maybe a short in the relay could be causing it as well.
goof2 is offline   Reply With Quote
Old 02-15-2011, 04:45 PM   #10
defector
My balls, your chin
 
defector's Avatar
 
Join Date: Nov 2008
Location: The desert of Az
Moto: 929, SV650, YZ250
Posts: 1,917
Default

Quote:
Originally Posted by goof2 View Post
It looks like both L & R side flashers run through the same relay. I'm just guessing, but maybe a short in the relay could be causing it as well.
That sounds like the winner.
__________________
Reading this signature may give you special powers, including the ability to run through walls. You should try it immediately.
defector is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.