Frame Sliders... - Page 3

z06boy · 07-14-2008, 10:41 AM

My wife dropped the R6 while turning at low speeed in the driveway and the frame sliders saved the bike from any damage.

They more than paid for themselves right there.

I know they are designed to protect the frame...not the fairings...that's why they're not called "fairing sliders"...but none the less they saved the fairings in this case which is an added benefit.

Hopefully we won't ever get a chance to crash test them.

DLIT · 07-14-2008, 01:57 PM

Quote:

Originally Posted by TIGGER

Yea I had Haris no cuts and the adapter bracket wrapped around the frame so it didn't move when I crashed. I think you can get good quality no cuts but I agree that for the most part you're better off with the cut in ones.

Yup. I got the Graves no-cut that wrap around the frame a bit to keep the adapter in place.

Mrs. Colleen · 07-14-2008, 05:28 PM

Thanks for all the info everyone!

Dave · 07-14-2008, 06:15 PM

Quote:

Originally Posted by Ebbs15

actually... most no cut sliders I've seen mount to fairing tabs... not to the motor...

could be that most I've seen were for my bike and that's the easiest bolt to mount to

i dont think they even make a cut slider for the 954, engine mount is right inside a hole in the fairing

Mr Lefty · 07-14-2008, 06:27 PM

well but they're probably just called SLIDERS not NO CUT sliders... as it's obvious you don't need to cut...

Dave · 07-14-2008, 06:39 PM

troof troof and of course its prob a moot point anyway since the only other 954 owner on here i can think of is osp and in some wierd way he would probably like the bike more if it got banged up so he had a good excuse to do some fightering'

Mr Lefty · 07-14-2008, 07:05 PM

very true

Amber Lamps · 07-14-2008, 07:53 PM

Quote:

Originally Posted by Dave

troof troof and of course its prob a moot point anyway since the only other 954 owner on here i can think of is osp and in some wierd way he would probably like the bike more if it got banged up so he had a good excuse to do some fightering'

his bike came with sliders...

Dave · 07-14-2008, 08:00 PM

i know, i was making funnies

Amber Lamps · 07-14-2008, 08:46 PM

Quote:

Originally Posted by Dave

i know, i was making funnies

oh...

07-14-2008, 06:39 PM	#26
Dave Chaotic Neutral Join Date: Feb 2008 Location: Cherry Hill NJ Moto: GV1200 Madura, Hawk gt Posts: 13,992	troof troof and of course its prob a moot point anyway since the only other 954 owner on here i can think of is osp and in some wierd way he would probably like the bike more if it got banged up so he had a good excuse to do some fightering' __________________ TWF Post whore #6

07-14-2008, 08:00 PM	#29
Dave Chaotic Neutral Join Date: Feb 2008 Location: Cherry Hill NJ Moto: GV1200 Madura, Hawk gt Posts: 13,992	i know, i was making funnies __________________ TWF Post whore #6

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-14-2008, 10:41 AM	#21
z06boy Letzroll Join Date: Feb 2008 Location: Lake Norman area, NC Moto: 07 Red R1 & 07 Blue R6 Posts: 5,265	My wife dropped the R6 while turning at low speeed in the driveway and the frame sliders saved the bike from any damage. They more than paid for themselves right there. I know they are designed to protect the frame...not the fairings...that's why they're not called "fairing sliders"...but none the less they saved the fairings in this case which is an added benefit. Hopefully we won't ever get a chance to crash test them.

07-14-2008, 05:28 PM	#23
Mrs. Colleen Leather and Lace Join Date: Feb 2008 Location: Goleta, Ca Moto: 2005 R6 Posts: 1,810	Thanks for all the info everyone!

07-14-2008, 06:27 PM	#25
Mr Lefty TWFix Legend Join Date: Feb 2008 Location: Denver CO Moto: 01 BMW F650GS Dakar Posts: 15,677	well but they're probably just called SLIDERS not NO CUT sliders... as it's obvious you don't need to cut...

07-14-2008, 07:05 PM	#27
Mr Lefty TWFix Legend Join Date: Feb 2008 Location: Denver CO Moto: 01 BMW F650GS Dakar Posts: 15,677	very true