Best on bike camera mount?

highflyer · 09-22-2008, 04:48 PM

hey all, just picked up a Casio EX-Z1080BE 10.1 MP camera and want to get a mount to put it on the bike every now and then for some on track footage and following peeps and what not.

any thoughts on which mount is the best for the money? never really looked into these before so not sure what to get or where really to look.

btw, the bike it'll be on is a 06' ninja 636, if that matters.....

thanks for all the help.....

ceo012384 · 09-22-2008, 05:02 PM

I have this setup... then there's no risk of fucking up my digicam.

http://forums.13x.com/showthread.php?t=169385

jtemple · 09-22-2008, 05:31 PM

I've been eyeing these:

http://www.techmounts.com/

sfarson · 09-23-2008, 12:10 AM

Have had good results with the gas cap ring mount at sportbikecam.com

Mr Lefty · 09-25-2008, 04:22 PM

The Ram mount I used for my GPS was great... though the plug for the stearing head was a bit finiky... but they make lots of them... and when you don't have your cam on it you can use it for a GPS, Radar detector, ect...

http://www.ram-mount.com/products/motorcycles.htm

Amber Lamps · 09-25-2008, 11:33 PM

I have a Saeng/Ta mount and it's ok but you get a lot of jitter. I think the gas cap mounts would be more solid but won't work if you have a dark wind screen. Personally,I've been looking at permanently mounted systems like CEO's. I've found them pretty cheap under $300.

09-22-2008, 04:48 PM	#1
highflyer Trailer Queen Join Date: Sep 2008 Location: Fort Walton Beach, Fl Moto: 06' Ninja 636, 08 ZX6, Ohlins WP, track toy Posts: 35	Best on bike camera mount? hey all, just picked up a Casio EX-Z1080BE 10.1 MP camera and want to get a mount to put it on the bike every now and then for some on track footage and following peeps and what not. any thoughts on which mount is the best for the money? never really looked into these before so not sure what to get or where really to look. btw, the bike it'll be on is a 06' ninja 636, if that matters..... thanks for all the help..... __________________ 06' 636 Full Akra Ti exhaust/PCIII 08' ZX6 Ohlins 25mm/KIT WP rear, Ohlins dampener, Vortex Clipons/Rearsets, Full Track 02' GMC 1500HD 4x4 If everything seems under control, you're just not going fast enough "When entering a corner,don't brake until you see God!" -K.Schwantz 34

09-22-2008, 05:02 PM	#2
ceo012384 Pompous Prick Join Date: Mar 2008 Location: MA Moto: 06 R6 (race), 04 CRF Tard (race) Posts: 3,040	I have this setup... then there's no risk of fucking up my digicam. http://forums.13x.com/showthread.php?t=169385 __________________ LRRS/CCS #123 Boston Moto Dunlop Woodcraft 35 Motorsports Sidi Pit Bull K&N Filters

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-22-2008, 05:31 PM	#3
jtemple Geek Join Date: Feb 2008 Location: Papillion, Nebraska Moto: 2011 Husqvarna TE630 Posts: 1,437	I've been eyeing these: http://www.techmounts.com/

09-23-2008, 12:10 AM	#4
sfarson On a Ride Join Date: Feb 2008 Location: The Rockies Moto: Two Wheels Posts: 104	Have had good results with the gas cap ring mount at sportbikecam.com

09-25-2008, 04:22 PM	#5
Mr Lefty TWFix Legend Join Date: Feb 2008 Location: Denver CO Moto: 01 BMW F650GS Dakar Posts: 15,677	The Ram mount I used for my GPS was great... though the plug for the stearing head was a bit finiky... but they make lots of them... and when you don't have your cam on it you can use it for a GPS, Radar detector, ect... http://www.ram-mount.com/products/motorcycles.htm

09-25-2008, 11:33 PM	#6
Amber Lamps Moto GP Star Join Date: Mar 2008 Posts: 14,556	I have a Saeng/Ta mount and it's ok but you get a lot of jitter. I think the gas cap mounts would be more solid but won't work if you have a dark wind screen. Personally,I've been looking at permanently mounted systems like CEO's. I've found them pretty cheap under $300.