Speaking of chains...

TYEster · 07-26-2009, 11:04 PM

A few questions, I think I already know the answers to but insist on asking them anyway.

Is it ok to use a 520 chain on a literbike? Last I remember 530 was the acceptable strength/weight for bigger HP motors.

Do they make chains that don't require lube anymore, or is that more for sprocket longevity?

BobTheBiker · 07-26-2009, 11:56 PM

nope, theres no such thing as maintenance free chains in the real world. it'd be nice, but I dont think theres such a thing.

for a 1000, I wouldnt go with a 520. I feel its TOO small for that size bike. 530 is great though.

Homeslice · 07-27-2009, 01:29 AM

I have a 520 on my 929. All the top manufacturers make 2-3 different "grades" of 520's, the most expensive ones are rated for more torque/tensile strength. So as long as you get that one you're fine.

BobTheBiker · 07-27-2009, 01:40 AM

Personally, despite knowing this, I just dont feel confident using that small a chain.

Gas Man · 07-27-2009, 09:31 AM

There is no such thing to "no maintance" on any final drive. Not chain, belt, or shaft. BUt they are in order from most to least amount of maintance.

I would have no problems running the 520 on a liter. I ran one on my 9R. Just get a good X-ring chain (DiD) and good sprockets. Then get an alignment tool and properly align the sprockets.

07-26-2009, 11:04 PM	#1
TYEster With MORE TYEstosterone Join Date: Dec 2008 Location: TX Moto: '12 KX450F / 08 YZ250F #512 / 07 KX65 #1 Posts: 1,429	Speaking of chains... A few questions, I think I already know the answers to but insist on asking them anyway. Is it ok to use a 520 chain on a literbike? Last I remember 530 was the acceptable strength/weight for bigger HP motors. Do they make chains that don't require lube anymore, or is that more for sprocket longevity?

07-27-2009, 09:31 AM	#5
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	There is no such thing to "no maintance" on any final drive. Not chain, belt, or shaft. BUt they are in order from most to least amount of maintance. I would have no problems running the 520 on a liter. I ran one on my 9R. Just get a good X-ring chain (DiD) and good sprockets. Then get an alignment tool and properly align the sprockets. __________________ -Chris "Why pay somebody else to fuck up your bike?" Run Amsoil Product

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-26-2009, 11:56 PM	#2
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	nope, theres no such thing as maintenance free chains in the real world. it'd be nice, but I dont think theres such a thing. for a 1000, I wouldnt go with a 520. I feel its TOO small for that size bike. 530 is great though.

07-27-2009, 01:29 AM	#3
Homeslice Elitist Join Date: Nov 2008 Location: SF Bay Area Moto: Gix 750 Posts: 11,351	I have a 520 on my 929. All the top manufacturers make 2-3 different "grades" of 520's, the most expensive ones are rated for more torque/tensile strength. So as long as you get that one you're fine.

07-27-2009, 01:40 AM	#4
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	Personally, despite knowing this, I just dont feel confident using that small a chain.