spare motor WTFH issue. #2 rod binds. - Page 2

Rider · 09-18-2009, 09:02 AM

Check the rod and bearings for any burs. I's start with fresh bearings to be on the safe side.

Avatard · 09-18-2009, 10:01 AM

http://www.ehow.com/how_2142943_use-...learances.html

101lifts2 · 09-19-2009, 02:34 AM

Quote:

Originally Posted by Avatard

http://www.ehow.com/how_2142943_use-...learances.html

I'm going to go out on a limb here, but he cannot move the rod on the crank the plastigauge is going to read 0. LOL

Sounds like you have the wrong bearing set esp. if the numbers don't match.

Didn't you put new rod bearings in this engine?

101lifts2 · 09-19-2009, 02:41 AM

The connecting rods are 38ftlbs, not 32...at least according to the latest GM service info.

• Install the connecting rod bolt nuts.
Tighten

• Tighten the connecting rod bolt nuts to 52 N·m (38 lb ft).
• Loosen the connecting rod bolt nuts 1 full turn.
• Tighten the connecting rod bolt nuts to 52 N·m (38 lb ft).

BobTheBiker · 09-18-2009, 12:00 PM

thanks. I have micrometers to be a touch more precise.

Avatard · 09-18-2009, 12:03 PM

How shit measures is one thing. How it fits together is another.

BobTheBiker · 09-19-2009, 09:33 AM

That 38 figure, is it for the 4.3 or the 2.2?

101lifts2 · 09-20-2009, 01:30 AM

Quote:

Originally Posted by bobthebiker

that 38 figure, is it for the 4.3 or the 2.2?

2.2l

BobTheBiker · 09-20-2009, 01:38 AM

I'm not sure but it probably varies from year to year doesnt it? or is that just across the board from 94-03's models?

if it makes any difference, mine is a 96, and my manual was purchased within the last few months. not a factory manual though, so its entirely possible that my specs ARE outdated.

101lifts2 · 09-21-2009, 04:18 PM

Quote:

Originally Posted by BobTheBiker

I'm not sure but it probably varies from year to year doesnt it? or is that just across the board from 94-03's models?

if it makes any difference, mine is a 96, and my manual was purchased within the last few months. not a factory manual though, so its entirely possible that my specs ARE outdated.

That is what GM says for 1996MY 2.2L in the Sonoma. I would just put it at 38. 6lbs isn't going to make a difference, but I would not put rod caps loose.

09-19-2009, 02:41 AM	#4
101lifts2 WSB Champion Join Date: Nov 2008 Location: Anaheim, CA Moto: 2009 Kawi ZX6R Posts: 5,570	The connecting rods are 38ftlbs, not 32...at least according to the latest GM service info. • Install the connecting rod bolt nuts. Tighten • Tighten the connecting rod bolt nuts to 52 N·m (38 lb ft). • Loosen the connecting rod bolt nuts 1 full turn. • Tighten the connecting rod bolt nuts to 52 N·m (38 lb ft). __________________ Train Hard Ron Paul - 2012 Mark of Excellence GM

09-18-2009, 12:03 PM	#6
Avatard Crotch Rocket Curmudgeon Join Date: Nov 2008 Location: Here to integrity Moto: Li'l red baby Ninja Posts: 7,482	How shit measures is one thing. How it fits together is another. __________________ Insert free thought here.

09-18-2009, 09:02 AM	#1
Rider Moto GP Star Join Date: Feb 2008 Posts: 12,156	Check the rod and bearings for any burs. I's start with fresh bearings to be on the safe side.

09-18-2009, 10:01 AM	#2
Avatard Crotch Rocket Curmudgeon Join Date: Nov 2008 Location: Here to integrity Moto: Li'l red baby Ninja Posts: 7,482	http://www.ehow.com/how_2142943_use-...learances.html __________________ Insert free thought here.

09-18-2009, 12:00 PM	#5
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	thanks. I have micrometers to be a touch more precise.

09-19-2009, 09:33 AM	#7
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	That 38 figure, is it for the 4.3 or the 2.2?

09-20-2009, 01:38 AM	#9
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	I'm not sure but it probably varies from year to year doesnt it? or is that just across the board from 94-03's models? if it makes any difference, mine is a 96, and my manual was purchased within the last few months. not a factory manual though, so its entirely possible that my specs ARE outdated.